J. D. Lacourse Carbide Saws by Everlast

Ideal for table saw use to provide fine finishing cuts in plywood, veneered panels, single-side laminated panels, masonite (coated or uncoated) along with crosscutting in hard or soft woods. SP860A 8" x 60T x 5/8" 10° Hook anglePlate - 0.087" | 2.2 mmKerf - 0.125" | 3.2 mm

Ideal for table saw use to provide fine finishing cuts in plywood, veneered panels, single-side laminated panels, masonite (coated or uncoated) along with crosscutting in hard or soft woods. SP860T8" x 60T x 5/8"10° Hook AnglePlate - 0.087" | 2.2 mmKerf - 0.125" | 3.2 mm

HD-series saws are specially designed for fast cutting on both manual and power feed ripping operations.Design features include large gullets, heavier plates and use of the proper clearances designed for this type of heavy duty cutting in both hard and soft woods.HD102410" x 24T x 5/8"20° Hook AnglePlate - 0.095" | 2.4 mmKerf - 0.145" | 3.7 mm

GL-series saws utilize a heavy plate and Triple Chip Grind to provide a smooth cut for all glue line applications on either straight or shadow line rips saws. For best results, use GL saws for rip cutting only. Design features include large gullets, heavier plates and use of the proper clearances designed for this type of heavy duty cutting in both hard and soft woods.GL103010" x 30T x 5/8"20° Hook AnglePlate - 0.095" | 2.4 mmKerf - 0.145" | 3.7 mm

An excellent all around saw ideally suited for the small woodworking or cabinet shops where one saw is used for all different types of cutting. It can be used for ripping or cross cutting in solid woods, particle board, plywood or laminated panels.CBS105010" x 50T x 5/8"15° Hook Angle Plate - 0.087" | 2.2 mm Kerf - 0.125" | 3.2 mm

Ideal for table saw use to provide fine finishing cuts in plywood, veneered panels, single-side laminated panels, masonite (coated or uncoated) along with crosscutting hard and soft woods.LSP1060A10" x 60T x 5/8" ATB Carbide Saw10° Hook AnglePlate: 0.087" | 2.2 mmKerf: 0.125" | 3.2 mm

Ideal for table saw use to provide fine finishing cuts in plywood, veneered panels, single-side laminated panels, masonite (coated or uncoated) along with crosscutting hard and soft woods.LSP1060T10" x 60T x 5/8" TCG Carbide Saw10° Hook AnglePlate: 0.087" | 2.2 mmKerf: 0.125" | 3.2 mm

Ideal for table saw use to provide fine finishing cuts in plywood, veneered panels, single-side laminated panels, masonite (coated or uncoated) along with crosscutting hard and soft woods.SPE1080A10" x 80T x 5/8" ATB Carbide Saw5° Hook AnglePlate: 0.087" | 2.2 mmKerf: 0.125" | 3.2 mm

Ideal for table saw use to provide fine finishing cuts in plywood, veneered panels, single-side laminated panels, masonite (coated or uncoated) along with crosscutting hard and soft woods.SPE1080T10" x 80T x 5/8" TCG Carbide Saw5° Hook AnglePlate: 0.087" | 2.2 mmKerf: 0.125" | 3.2 mm

Designed for smooth, burr free cuts on all types of aluminum extrusions, thin wall tubing and thin gauge sheets with a wall thickness of 1/16" to 1/8". These blades work particularly well on double mitre or portable mitre box machines. Please note that a lubricant should always be used during cutting and material should always be secured while being cut.NF108010" x 80T x 5/8" TCG Non-Ferrous Carbide Saw-5° Hook AnglePlate: 0.094" | 2.4 mmKerf: 0.125" | 3.2 mm ...